Disc Makers reflex series Guide d'installation Page 5
- Page / 38
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
t Reflex Duplicator Manual
- 9 -
By default, the “Auto Start“ setting is set to
“Auto“. For example, if your duplicator has
detected 3 blank discs and didnít detect any
additional blank discs within 30 seconds, then the
duplication will start automatically.
Once the number of blank discs you inserted
matches the number of discs detected on the
screen. Then press “ENT“ (if you are not using
Auto Start or wish to speed up the process) to
confirm and the following Processing screen will
appear.
If the number of blank discs you inserted doesnít
match the number of discs detected on the
screen, please give 10-15 seconds for the
duplicator to recognize all of your blank discs
e. After 2 or 3 seconds of processing time, the following
Copy Progress Screen will appear.
Counter Specified No Counter
OR
Processing...
Please Wait
Copying ... 4012MB
0 12%
Copying ... 4012MB
0/21 12%
- “4012MB” indicates the capacity of the
master disc.
- “12%” indicates the current progress of
the duplication.
- “0/21” indicates you have a project size
of 21 copies and you have made 0
copies so far.
- “4012MB” indicates the capacity of the
master disc.
- “12%” indicates the current progress of
the duplication.
- “0” indicates that you have made 0
copies so far.
t Reflex Duplicator Manual
- 10 -
It is normal to see the progress indicator stays at 0-
10% and 100% for approximately 30 seconds for
CD duplication and up to 1 minute for DVD
duplication. That is caused by the initializing and
finalizing stage.
Once the duplication run is completed, the successful copies will
be ejected and you shall see the following screen:
O
Next, refill more blank media to continue making more
copies, or you can press “ESC“ to terminate your project
and go back to the main menu.
If youíve specified a counter value for your project and
your project is completed, you shall see the following
screen:
If you see above message, you can press “ENT“ to go
back to main menu.
21 Disc Copie
d
Press OK to Finish
PASS 7 FAIL 0( 7)
W
aiting for Blanks
- “PASS 7” indicates that you’ve
just made 7 successful copies.
- “FAIL 0” indicates that you
have no failure in this run.
- “7” indicates that you’ve
successfully copied 7 copies so
far.
Produits connexes et manuels pour Duplicateurs de médias Disc Makers reflex series
(1 pages)Jet Tools SR-2236N manuales
Manuales del propietario y guías del usuario para Trabajo del metal Jet Tools SR-2236N.
Ofrecemos 1 manuales en pdf Jet Tools SR-2236N para descargar gratis por tipos de documentos: Manual de usuario
Commentaires sur ces manuels